BJD-L62-4D Four process CNC Machining Center
Suitable for linear edge banding of solid wood board, fiberboard, particle board and other sheet workpieces. Edge banding materials can be solid wood strip, PVC, melamine, veneer
● Using imported motors and high-quality electrical components.
● Edge banding machine effect is high precision and high efficiency.
● Flat head device moves through precise linear guide rails, adopts automatic tracking of the mold, and high-frequency high-speed motor fast cutting to ensure the cut surface is smooth and smooth.
● Finishing device is used to repair the excess edge banding material on the upper and lower parts of the edge band of the board. It adopts the structure of automatic tracking and high-frequency high-speed motor to ensure the smoothness of the upper and lower parts of the trimmed board.
|
Model |
BJD-F650C |
|
Edge band thickness |
0.4-3mm |
|
Sheet workpiece thickness |
10-60mm |
|
Speed |
15m/18m/20m/min |
|
Minimum plate width |
80mm |
|
Minimum plate size |
120*120mm 30*120mm（Narrow Size） |
|
Plate spacing |
600-800mm |
|
Total Power |
11.5KW |
|
Voltage |
380V（±5%） |
|
working pressure |
0.6Mpa |
|
Dimensions |
4500*920*1715mm |
Features：
The machine control interface design is user-friendly, fool-proof operation, and the operator can get on the job after simple training, without the need for technical workers. The machine moves quickly and efficiently, helping you achieve a leap in productivity.
Can seal 30mm narrow strip
Encoder control, subvert the traditional position mode, more accurate position calculation, more accurate action trigger
Crawler pressing: uniform pressure, smooth operation of the workpiece, no indentation, clean board, good edge sealing quality.
The gluing and sealing device makes the gluing of edge plate and edge sealing material even through the special structure to ensure the adhesive force is more firm.
The end trimming device moves through precise linear guide rails, adopts automatic tracking of the mold and high-frequency high-speed motor fast cutting to ensure the cut surface is neat and smooth.
The rough and finishing device is used to repair the excess edge-sealing material on the upper and lower parts of the edge band of the board. It adopts the structure of automatic tracking of the mold and high-frequency high-speed motor to ensure the smoothness of the upper and lower parts of the trimmed board.
The scraping device is used to eliminate the ripple marks caused by the non-linear motion of the trimming cutting process, so that the upper and lower parts of the sapwood are smoother and cleaner.
Pneumatic polishing device is used to clean the processed plate with cotton polishing wheel, and smooth the edge sealing end surface by polishing.