BJD-F730 Automatic Edge Banding Machine
It is suitable for straight edge sealing of solid wood board, fiberboard, particleboard and other board workpieces. The edge sealing materials can be solid wood strip, PVC, melamine, thin wood skin, etc.
● Adopt imported motor and high-quality electrical components.
● High precision and high efficiency of edge banding machine.
● The end trimming device adopts the structure of automatic tracking of profiling and high-frequency high-speed motor fast cutting through precise linear guide rail movement, so as to ensure the flatness and smoothness of the cutting section.
● The fine trimming device is used to trim the excess edge banding materials of the upper and lower parts of the edge banding belt of the processed plate. The structure of automatic tracking of profiling and high-frequency high-speed motor is adopted to ensure the flatness and smoothness of the upper and lower parts of the edge trimming plate.
| Model |
BJD-F730 |
| Edge band thickness |
0.4-3mm |
| Sheet workpiece thickness |
10-60mm |
| Conveyor speed |
15m/18m/20m/min |
| Minimum plate width |
80mm |
| Minimum plate length |
120mm |
| Plate spacing |
600-800mm |
| Total power |
14.2KW |
| Voltage |
380V（±5%） |
| working pressure |
0.6Mpa |
| Dimensions |
6370*920*1715mm |
Features：
The machine control interface design is user-friendly, fool-proof operation, and the operator can get on the job after simple training, without the need for technical workers. The machine moves quickly and efficiently, helping you achieve a leap in productivity.
The important electrical components in the control cabinet are all imported electrical components such as Delixi; the main circuit is equipped with thermal protection to eliminate interference and ensure the stability of the control system.
Track pressing: the pressing force is uniform, the workpiece runs smoothly, there is no indentation, the surface of the board is clean, and the edge sealing quality is good.
Adhesive coating and bonding device makes the edge banding plate and edge banding material uniformly glued through a special structure to ensure stronger adhesion.
The end trimming device moves through precise linear guide rails, adopts automatic tracking of the mold and high-frequency high-speed motor fast cutting to ensure the cut surface is neat and smooth.
The rough and finishing device is used to repair the excess edge-sealing material on the upper and lower parts of the edge band of the board. It adopts the structure of automatic tracking of the mold and high-frequency high-speed motor to ensure the smoothness of the upper and lower parts of the trimmed board.
Rounded corner repair device under profile tracking can make the end face of the board more smooth and beautiful
The scraping device is used to eliminate the ripple marks caused by the non-linear motion of the trimming cutting process, so that the upper and lower parts of the sapwood are smoother and cleaner.