BJD-F730J Automatic Edge Banding Machine
It is suitable for straight edge sealing of solid wood board, fiberboard, particleboard and other board workpieces. The edge sealing materials can be solid wood strip, PVC, melamine, thin wood skin, etc.
● adopt imported motor and high-quality electrical components.
● high precision and high efficiency of edge banding machine.
● the head trimming device adopts the structure of automatic tracking of profiling and high-frequency high-speed motor fast cutting through precise linear guide rail movement, so as to ensure the flatness and smoothness of the cutting section.
● the fine trimming device is used to trim the excess edge banding materials of the upper and lower parts of the edge banding belt of the processed plate. The structure of automatic tracking of profiling and high-frequency high-speed motor is adopted to ensure the flatness and smoothness of the upper and lower parts of the edge trimming plate.
| Model |
BJD-F730J |
| Edge band thickness |
0.4-3mm |
| Workpiece thickness |
10-60mm |
| Conveyor belt speed |
15m/18m/20m/min |
| Minimum Width of workpiece |
80mm |
| Minimum Length of workpiece |
120mm |
| Minimum plate length (pre-milling) |
300mm |
| Sheet Spacing/ Distance between two workpieces |
600-800mm |
| Total power |
18KW |
| Voltage |
380V（±5%） |
| Air pressure |
0.6Mpa |
| Dimension |
7120*920*1725mm |
Company Advantages：
Stress aging instrument: Apply additional dynamic stress to the workpiece in the form of resonance. When the additional dynamic stress and the residual stress are superimposed and reach the yield limit of the material, the workpiece undergoes micro or macro plastic deformation, thereby reducing and homogenizing the residual inside the workpiece Stress and stabilize its dimensional accuracy.
All machine beds are processed by large high-precision pentahedron machining centers (roughing, finishing, drilling, tapping)
Infrared collimator is a precise angle measuring instrument, which consists of two parts: a parallel light tube and a telescope; an instrument for precise distance measurement using modulated infrared light. Simultaneous measurement and display of two-dimensional angles;Guarantee equipment quality (flatness, perpendicularity, parallelism, etc.).
Numerical control equipment uses laser interferometer for precision detection and automatic compensation.
Features：
The machine control interface design is user-friendly, fool-proof operation, and the operator can get on the job after simple training, without the need for technical workers. The machine moves quickly and efficiently, helping you achieve a leap in productivity.
The pre-milling device modifies the burr of the plate when it is chipped or not vertical, so that the edge band is closer to the plate, so as to achieve better edge sealing effect, better overall and aesthetic
Track pressing: the pressing force is uniform, the workpiece runs smoothly, there is no indentation, the surface of the board is clean, and the edge sealing quality is good.
The end trimming device moves through precise linear guide rails, adopts automatic tracking of the mold and high-frequency high-speed motor fast cutting to ensure the cut surface is neat and smooth.
The rough and finishing device is used to repair the excess edge-sealing material on the upper and lower parts of the edge band of the board. It adopts the structure of automatic tracking of the mold and high-frequency high-speed motor to ensure the smoothness of the upper and lower parts of the trimmed board.
Rounded corner repair device under profile tracking can make the end face of the board more smooth and beautiful
Pneumatic polishing device is used to clean the processed plate with cotton polishing wheel, and smooth the edge sealing end surface by polishing.